Cable Kits
Precision Data Technology provides two prepackaged cable kits for quick and easy assembly of its Neutron Detector Pulse Counting Modules--the CKA and the CKB. If neither of these kits suits your needs, please contact us .
NOTE: Unless otherwise stated, the standard length of each cable is one meter.
CKA
-
Single Module Setup Kit
(For PDT100A, PDT110A, PDT120A)
|
One(1) Non-conducting screwdriver. |
|
|
One(1) Cable connection to "+Vcc" which terminates to a BNC connector on the opposite end. |
|
|
One(1) Cable connection to "TTL OUT" which terminates to a BNC connector on the opposite end. |
|
|
One(1) Cable connection to "HV IN" which terminates to SHV connectors on both ends. |
CKB
-
Multiple Module Setup Kit
For Powering Multiple Modules
and Digital Summing
(For PDT100A, PDT110A, PDT120A)
|
|
One(1) Non-conducting screwdriver. |
|
|
One(1) "+Vcc" Cable for daisy-chaining power between PDT series modules. |
|
|
One(1) Cable for connecting between "TTL OUT" and "TTL IN" of two separate PDT100A, PDT110A or PDT120A modules. This cable provides digital pulse summing capability using multiple PDT110A instruments. |
|
|
One(1) Cable connects to the "HV IN" SHV connector. This cable terminates to SHV female connectors on each end of the cable. |
|
|
One(1) SMB T-Connector for "+Vcc" interconnections. |
|
|
One(1) SMB T-Connector for "HV IN" interconnections. |
Individual Cable
Ordering Information
(For PDT Series 100A, 110A and 120A)
If neither of the above
cable kits suits your application needs, you may
contact
us
directly for your special order. Please use the
appropriate PDT cable part numbers when you place your
individual cable order.
Products | Features | Dimensions | FAQ's | Warnings | Contact Us | Home
Copyright 2000-2022,
Precision Data Technology, Inc. All Rights Reserved
Designed by
Spidernet
and Maintained by
Tim Eccleston